Flow Control & Non Return Valves
Flow Control & Non Return Valves
Flow control valves are used in application wherein the user wishes to control the speed of the cylinder or a pneumatic actuator. The speed can be controlled by turning a needle by the required amount. This enables infinite control over the speed of the pneumatic product
Non return valves are used to protect Pneumatic equipment where the air should not return back in the direction it has entered. This is also used in protecting Hight pressure air from entering a low pressure line.
The above products are available in G 1/8”, G ¼”, G ½” and G ¾” sizes
The detailed models are listed below
| Model No. | Description | Size BSP | Orifice (mm) | Flow NLPM | Seal Kit No. |
|---|---|---|---|---|---|
| F1 | Straight Flow Control Valve | 1/8″ | Ø3.50 | 250 | SKF1 |
| F2 | Straight Flow Control Valve | 1/4″ | Ø6.50 | 1100 | SKF2 |
| F4 | Straight Flow Control Valve | 1/2″ | Ø12.50 | 3000 | SKF4 |
| F5 | Straight Flow Control Valve | 3/4″ | Ø19.00 | 7000 | SKF5 |
*Add Voltage & Connector Suffix While Ordering
| Model No. | Description | Size BSP | Orifice (mm) | Flow NLPM | Seal Kit No. |
|---|---|---|---|---|---|
| UF1 | Straight Flow Control Valve | 1/8″ | Ø3.50 | 250 | SKUF1 |
| UF2 | Straight Flow Control Valve | 1/4″ | Ø6.50 | 1100 | SKUF2 |
| UF4 | Straight Flow Control Valve | 1/2″ | Ø12.50 | 3000 | SKUF4 |
*Add Voltage & Connector Suffix While Ordering
| Model No. | Description | Size BSP | Orifice (mm) | Flow NLPM | Seal Kit No. |
|---|---|---|---|---|---|
| NR1 | Non-Return Valve | 1/8″ | Ø3.50 | 250 | SKNR1 |
| NR2 | Non-Return Valve | 1/4″ | Ø6.50 | 1100 | SKNR2 |
| NR4 | Non-Return Valve | 1/2″ | Ø12.00 | 2300 | SKNR4 |
| NR4H | Non-Return Valve | 1/2″ | Ø11.00 | 2300 | SKNR4H |
| NR5 | Non-Return Valve | 3/4″ | Ø19.00 | 7000 | SKNR5 |
| NR5H | Non-Return Valve | 3/4″ | Ø19.00 | 7000 | SKNR5H |
| NR6H | Non-Return Valve | 1″ | Ø24.50 | – | SKNR6H |
*Add Voltage & Connector Suffix While Ordering
